When visiting a property to buy, almost everyone focuses on the flooring, walls, or visible dampness, but few check the plumbing. And that's where the most expensive surprises after moving in often appear: old pipes, hidden leaks, low water pressure, or bad smells from the drains.
This guide explains the 5 key steps to checking the plumbing before buying a house: what to check on faucets, drains, and water pressure, how to detect hidden leaks, how to determine the pipe material, and what questions to ask the seller. You'll also learn when it's worth having a professional inspection.
Main causes of plumbing problems in homes
- Old lead or iron pipes: Many homes, especially older ones, still have pipes made of materials that are no longer used due to their long-term problems. These metals corrode over time and can leak hazardous materials or cause blockages.
- Damaged joints: The joints between sections of pipe, faucets, and drains are often weak points that, if not checked, will eventually leak. In homes with shoddy renovations or old installations, the joints are likely to be worn out.
- Poor pipe insulation: Uninsulated pipes, especially those running through cold areas, are prone to condensation and leaks. In winter, they can even burst if temperatures drop significantly.
- Accumulation of lime and sediments: In many Spanish cities, the water is very hard, which creates solid deposits that clog taps, showers, and toilets. It can also affect water pressure and leave residue in household appliances.
- Hidden leaks behind walls or false ceilings: A small leak is not always easily detected; often the most problematic leaks are hidden and only become noticeable when they have already caused damage to walls, floors or ceilings.
How to check plumbing before buying a house, step by step
-
Locate and check the main shut-off valve
Start by locating the main water shut-off valve for the house. It's usually near the entrance, next to the electrical panel, or in the kitchen. Open and close it to make sure it works properly, turns smoothly, and isn't leaking. If it's clogged or you see dampness, you should inform the seller or request a professional inspection.
This step is essential: if you ever have to deal with a breakdown, the main shut-off valve will be your lifesaver. It's common to find valves that are rusty or have slow leaks, which then become a bigger problem. Make sure it's accessible and in good condition. If you can't locate the valve easily, suspect a hasty installation.
Take this opportunity to check for other secondary drains, such as those in the bathroom or kitchen. If you find problems there, the rest of the plumbing is probably not in good condition either.
-
Test the water pressure and flow rate at all taps
Enter each bathroom, the kitchen, and any secondary water outlets. Open all taps, both hot and cold, to full power. Pay attention to the water pressure and whether the flow is consistent. If a tap is running with less force, it could be a sign of a blockage or limescale buildup.
Inconsistent water pressure or a trickle of water often indicates internal problems in the pipes. If the water is dirty, contains sediment, or has a strange odor, take note: something in the system isn't working properly. Showers are usually the best indicator of the actual water pressure in your home.
In my old apartment, because I only trusted the kitchen taps, I didn't test the water pressure in the shower, and when I went to use it for the first time, the water came out in trickles. Then I discovered a thick layer of limescale on the hose and shower head. Lesson learned: always check all the water outlets.
-
Check the condition of drains and traps
Fill the sink, the kitchen sink, and the bathtub (if there is one), and then empty them all at once. Observe how the drain works: it should drain quickly and without making any unusual noises. If you notice bubbling, unpleasant odors, or that the water is slow to drain, there may be a blockage in the pipes.
Also check the drain trap under the sink and basins. If you see dampness, dripping, or mold, this installation has seen better days. A dry or very dirty trap is a sign of infrequent use or a deeper blockage.
Pay special attention in older kitchens, because grease and food scraps often form blockages that are difficult to clear without dismantling half the cabinet.
-
Visually inspect all visible pipes
Take a look at all exposed pipes in kitchens, bathrooms, and, if you have one, in the patio. Look for rust, green stains (a sign of copper leaks), corrosion, or any dried water stains. Touch the joints with a dry paper towel and see if it gets damp.
Joints are the most prone to leaks and drips. If you see duct tape covering any pipes, that's a bad sign: it's usually a temporary fix. The same goes for dried sealant or makeshift, unconventional joints.
Don't forget about appliance plumbing. A pipe with a bulge or dents, even a small one, can burst sooner than you think.
-
Check for any dampness and stains on walls, ceilings and floors
Go through every room looking for dark stains, damp patches, bulging walls, or blackened tile grout. Pay special attention to ceilings under bathrooms and kitchens, because many leaks travel silently before becoming visible.
Touch the paint in the corners of bathrooms and kitchens. If it's soft or peeling, water may be seeping in underneath. Also, check the smell; damp areas have a distinct odor.
If you notice a suspicious area, you can request a thermal imaging report to be sure before buying. If there's dampness, the plumbing may already be in need of repair.
-
Request documentation of recent revisions or renovations
Ask the landlord if they have any documentation of plumbing work or invoices for recent repairs. Specifically ask about the year the water system was installed. If they say they've replaced pipes, ask them to show you where and when.
A property without proper documentation or a renovation history often has outdated installations. While this might seem like a minor detail, it can lead to significant expenses if you need to replace the entire system within a few years.
On one of my house viewings with friends, we noticed that the entire bathroom was new… except for the pipes, which were still iron and hidden behind the tiles. It's always better to ask beforehand than to regret it later.
Materials and tools needed to check plumbing before buying a house
- Powerful flashlight: To properly inspect joints and pipes in dark places, especially under sinks and behind washing machines.
- Absorbent paper: It will help you detect small leaks by running the paper along joints, seams, and edges in search of moisture.
- Screwdriver: Necessary if you need to remove any access covers or check the inside of accessible traps.
- Camera or mobile phone: To document any damage, stains, or questionable installation and be able to show it to the professional or negotiate it with the seller.
- Small adjustable wrench: In case you need to slightly adjust any loose taps and check if they close properly.
- Notepad: Write down what you see, suspicious details, if there is bad pressure in any tap or if you find rusty seals.
- Humidity detector (optional): If you want to do a thorough inspection or the house is old, a detector helps you identify problems that haven't yet surfaced in the paint.
Common mistakes when checking plumbing before buying a house
- Focus only on the kitchen faucets: Many homeowners turn on the kitchen tap and, if everything seems normal, assume the rest is the same. However, each tap can have different problems, and the kitchen tap is often the best maintained and most recently renovated.
- Forget about connected appliances: Washing machines, dishwashers, and water heaters are also part of the installation. If you don't check their connections, it's easy to miss small leaks that can lead to dripping water or damage to your furniture.
- Do not look behind secondary bathrooms/toilets: It's a classic mistake: you check the main bathroom and forget about the small powder room, which is often the one with the most problems because it's used less. Bad smells and leaks tend to appear there first.
- Ignoring hard-to-reach joints and seams: It's awkward to reach under the sink or behind the washing machine, but those are often the areas where leaks tend to accumulate. Don't just rely on what's visible; search carefully in the corners.
Extra tips to avoid plumbing problems in your new home
- Perform regular annual maintenance: Even if everything is working after you move in, have your joints, traps, and pipes checked at least once a year to detect any incipient leaks early.
- Install limescale filters if the water is hard: In areas where limescale is a problem, a simple filter at the main inlet reduces the risk of blockages, breakdowns in water heaters, and dripping taps due to buildup.
- Don't ignore bad smells in drains: If you notice an odor, clean it as soon as possible, and if it persists, call a professional. A dry drain, blockage, or leak can be minor issues if addressed promptly, but serious problems if left untreated.
- Call a trusted plumber if you have even the slightest doubt: If you've found any shoddy work or you're unsure whether the plumbing is okay, it's better to invest in a professional inspection rather than risk the problem getting worse.
👉 You may also be interested in: Unclogging a bathtub in minutes with a suction cup, step by step
Frequently asked questions about checking plumbing before buying a house
-
How much does it cost to have the plumbing checked before buying a house?
The price depends on whether you do it yourself or call a professional. A visual inspection won't cost you anything but your time, but if you need a specialized technical report, it can range from €80 to €200 depending on the location and complexity. It's a small investment compared to the potential costs of repairing a hidden leak. -
What signs should I look for to know if the installation is old?
Check if the exposed pipes are made of lead or dark metal (iron), if the faucets have rust marks, or if the water pressure is low in several places. Recent renovations often include new gaskets, shiny valves, and materials like PVC or polyethylene. -
What should I do if I detect dampness or mold during the visit?
If you come across a damp patch, ask the owner for an explanation and documentation regarding any leaks that have been repaired. If in doubt, have a professional inspection done. Negotiate the price or the cost of repairs before finalizing the purchase; you can even include it as a condition in the contract. -
Is it mandatory to request a plumbing report before signing the purchase agreement?
It is not legally required, but many real estate experts and consumer associations recommend it (for example, the OCUThis way you can uncover hidden problems and avoid surprises after signing.
👉 You may also be interested in: Sealing bathroom joints: 5 easy and effortless steps
Anyway, I wish I'd had this advice when I went to have the plumbing checked before buying my first house. If you take the time to look at every detail carefully before signing anything, you'll avoid surprises like the ones I had. I encourage you to keep reading more practical guides I have on the blog about DIY and home maintenance. Together, we can save ourselves a lot of trouble and enjoy a house in good condition.
