Laminate flooring over the old one: 5 effortless steps

Laying laminate flooring over existing flooring is a quick and clean way to renovate a room without removing the existing floor, without debris, and in much less time than a complete renovation. However, the result depends on the subfloor being in good condition and the surface being properly prepared.

In this guide we explain how to lay laminate flooring over existing flooring in 5 steps: what to check before starting (leveling, moisture and condition of the floor), what insulating underlay to use, how to lay the planks and deal with doors and baseboards, and the most common mistakes that cause noise or undulations.

Why is it often the case that you need to put laminate flooring over old flooring?

  • Old, worn, or ugly floors: Houses that are over 20 or 30 years old often have terrazzo, stoneware, or wooden tiles that have lost their shine and have stubborn stains. Replacing them involves significant expense and construction work, which is why the option of installing laminate flooring over the old floor is so appealing.
  • Avoid cumbersome work: Removing the existing floor generates a lot of debris and dust, which involves inconvenience, permits, and additional costs. That's why many people prefer the quick solution of simply laying the laminate flooring on top.
  • Improve thermal and acoustic insulation: Old ceramic or marble floors are very cold and transmit noise. Laminate flooring, with its insulating underlay, helps create a more comfortable feel at home.
  • To conceal minor irregularities: Sometimes old flooring has irreparable stains, a few missing tiles, or minor cracks that don't warrant replacing the entire floor. New laminate flooring neatly and attractively conceals these imperfections.
  • Quick aesthetic update: Laminate flooring is a simple way to modernize a home before renting or selling it, or to refresh the look when you don't want to deal with complicated renovations.

Step by step: how to install laminate flooring over old flooring effortlessly

  1. Clean and prepare the old floor thoroughly.

    This step is crucial; don't skip it, even if the floor looks clean. Remove dust, grease, wax residue, and any other cleaning products, and thoroughly vacuum all the grooves and baseboards. Then, mop with a slightly damp mop and wait for it to dry completely. If you find any areas with ingrained dirt, use a stain remover suitable for your type of flooring. Double-check everything because your new laminate flooring will only look its best if the surface underneath is perfect.

  2. Check the level and correct minor irregularities

    Laminate flooring requires a smooth, level subfloor. If the existing floor has bumps, gaps, or loose tiles, it needs repair. For minor unevenness, you can use a leveling compound that is easily applied according to the manufacturer's instructions. If there are loose tiles, fix them with quick-setting cement. The subfloor should have a maximum tolerance of 2 mm every 2 meters. Use a long straightedge or level to check this: the better the subfloor is, the better the laminate will sit and the fewer creaks you'll hear.

  3. Put down the insulating blanket or laminate base.

    The next step is to place the insulating underlay or sheet over the existing floor. This is essential to prevent noise, insulate against moisture, and ensure the floor doesn't transmit cold. The most common underlays are made of polyethylene, special foams, or even sheets with a built-in moisture barrier. Spread it across the entire surface, slightly overlapping the edges and securing them with tape. If you skip this step, the floor will creak a lot and won't last as long.

  4. Lay the laminate flooring planks

    Start from a corner of the room, leaving a 7-10 mm expansion gap from the walls (very important, even if it doesn't seem like it now). Use wedges to maintain this gap. The slats are installed perpendicular to the main light source so the joints are less noticeable. Join each slat using its "click" system or the one specified by the manufacturer, making sure there are no gaps. Work row by row, cutting the last pieces if necessary. My advice: before cutting, measure carefully and hold the slat upright to check the fit.

  5. Finish the baseboards and finishing details

    Once the flooring is in place, remove the wedges and install the new baseboards, which will cover the expansion joint. You can choose self-adhesive or screw-in models. If the old ones are in good condition and you don't want to remove them, sometimes a square molding glued on top is enough. Remember to seal the edges in damp areas (kitchen or bathroom) with special floor sealant to prevent water from seeping in. And, although it might be a chore, check the entire perimeter and door frames.

  6. Clean and check the final finish

    It's almost done. Use a mop or a gentle vacuum to remove any dust or shavings from the cut edges. Make sure all the seams are tight, with no planks moving or shifting. Check that the laminate flooring over the old floor is firm and even underfoot. If you hear any unusual creaking or squeaking, check the insulation or any problem areas; it's easier to fix them now than months later. Once everything is perfect, you can place your furniture and enjoy the result.

👉 You may also be interested in: Reliably prevents your garage floor from getting wet in winter

Essential materials and tools for installing laminate flooring over old flooring

  • Laminate flooring: The star of the renovation, in the color and format you prefer. Choose one with a click-lock system and good durability.
  • Insulating blanket or base: It is the layer that goes between the old and the new floor, absorbs noise and moisture, and improves thermal insulation.
  • Long ruler or level: To check that the floor is level before starting. Essential to avoid long-term problems.
  • Cutter and handsaw (or jigsaw): To cut the slats to size and fit in corners or next to doors.
  • Wedges and spacers: They allow expansion joints to be attached to the wall precisely and safely.
  • Adhesive tape: It is used to join the sheets of the insulating base and fix it in place.
  • New skirting boards or baseboards: They finish off the entire perimeter, cover the joint, and give a professional look.
  • Leveling compound (if necessary): To correct small unevenness or gaps in the old floor before laying the laminate.
  • Silicone for gaskets: In humid areas or near doors, prevent water from seeping under the laminate.
  • Pencil and measuring tape: To measure and mark the cuts accurately. A mistake here will be very noticeable in the final result.

Common mistakes when installing laminate flooring over old flooring

  • Not checking the leveling: Installing new flooring directly without checking for bumps or unevenness in the existing floor can quickly lead to noise and loose planks. This oversight is very common and often very difficult to fix.
  • Skip the insulating blanket: Thinking "it's not necessary anyway" because the old floor is clean is a mistake. Without the underlay, you'll have problems with dampness, noise, and a shorter lifespan for the laminate flooring.
  • Laying laminate flooring without expansion joints: By not leaving those millimeters next to the wall, the floor will end up bulging or separating when the house temperature changes.
  • Measuring and cutting the slats incorrectly: This can lead to uneven joints, overly tight pieces, or the classic gap in the middle of the room. Always double-check before sawing.
  • Placing furniture or stepping heavily too soon: Although the click system is fast, it's best to wait a few hours before putting any weight on it to allow everything to settle perfectly and prevent the newly installed slats from shifting.
  • Using unsuitable products to clean afterwards: Some people mop the floor while it's soaking wet or use abrasive products; this is a mistake because water can seep through the joints and the floor will lose stability and appearance.

👉 You may also be interested in: Damp-proof seal on exterior baseboards: step-by-step guide

Practical tips to prevent future problems with laminate flooring over old flooring

  • Ventilate the house well during installation: This way the old floor will be completely dry and the laminate will not absorb moisture, which could lead to stains or warping.
  • Always choose quality materials: A good laminate floor and a suitable base make the installation last much longer and withstand daily use without problems.
  • Always clean with specific, gentle products: Avoid using a very wet mop and use neutral products to avoid damaging the joints and the finish of the slats.
  • Replace felt protectors on furniture: This will prevent accidental scratches and prolong the life of the laminate flooring installed over the old one.
  • Control humidity in bathrooms and kitchens: If you put laminate flooring over old flooring in these rooms, seal the joints well and ventilate to prevent pockets of moisture or mold from forming between the layers.

Frequently asked questions about laying laminate flooring over old flooring

  • Can laminate flooring be installed over old tiles or terrazzo?

    Yes, laminate flooring can be installed over existing tiles, terrazzo, or parquet, provided the surface is smooth and level. Thorough cleaning is essential, and a suitable underlayment is necessary to prevent moisture problems or noise. If the tiles are very uneven or broken, it's best to repair them beforehand. Always check with the laminate manufacturer to see if they recommend any special underlayment for your existing floor.

  • Is it heavy to put laminate flooring over old flooring?

    No, laminate flooring is quite lightweight compared to other systems, typically between 7 and 10 kilos per square meter. If the floor structure is in good condition, there's no problem. However, if you live in a very old building, consult a professional beforehand to ensure it can support the extra weight. In most home renovations, this poses no risk.

  • Is it easy to remove laminate flooring if I get tired of it later?

    One of the biggest advantages of laminate flooring is that it's relatively easy to remove, as it's usually installed using a floating system without glue. You simply remove the baseboards and lift the planks; you can even reuse some if they're in good condition. However, if the old floor is damaged, removing the laminate will reveal the imperfections.

  • What maintenance does laminate flooring installed over the old flooring require?

    Maintenance is minimal: simply sweep, mop, or vacuum gently, and clean with a slightly damp cloth and neutral cleaning products. Avoid prolonged moisture buildup, as it could seep through and damage the existing subfloor. If liquid is spilled, dry it as soon as possible. This way, your laminate flooring over your existing floor will look impeccable for many years.

Final recommendations and a neighbor's tip

I always say that installing laminate flooring over old flooring is one of those renovations that has changed the lives of DIY enthusiasts in Spain. Many times at home, or helping out family members, I've seen how a house is rejuvenated in a matter of hours and without the madness of traditional construction. Of course, you have to do it right, step by step, and with a clear head. If you decide to install it, enjoy the process, ask all the questions you need, and don't skimp on the underlayment: it will save you a lot of trouble. Here's the OCU guide on laminate flooring If you'd like to compare brands or quality, leave a comment if you have any questions, and check out my other blog guides: you're sure to find some other tips and tricks for your home that will be just as perfect as the new flooring.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top